HOME >> PRODUCTS >> LIFTING CLAMP >> PLATE CLAMP
A heavy-duty DPD horizontal lifting clamp manufactured from high-quality carbon steel, featuring a replaceable screw jaw and integrated safety button, that lifts and transports steel plates, structural sections and profiled bars in horizontal position — built for steel fabrication yards, construction sites and steel stockyards that need versatile multi-profile horizontal lifting, not just standard flat plate handling.
The DPD horizontal lifting clamp is suitable for lifting and transport of steel plates, construction and profiled bar in horizontal position. Manufactured from high-quality carbon steel, it is available from DPD-0.8 at 0.8t per pair up to DPD-10 at 10t per pair. The working load limit is the maximum load the clamp is authorized to support when used in pairs with a lift angle of 60°, and in lifting operations the clamps can be used in pairs or multiples.
The screw jaw of the body can be changed, and the clamp also has a safety button. Jaw opening ranges from 0–25 mm on the DPD-0.8 up to 0–125 mm on the DPD-10, with net weight from 2.5 kg up to 33 kg. Snatch or shock loading must be avoided.
Specially designed for the horizontal lifting and transportation of steel plates, construction materials and profiled bars.
Manufactured from high-quality carbon steel, providing a strong and durable structure for lifting operations.
Available in 0.8–10T WLL per pair, with jaw openings from 0–125 mm for different material thicknesses.
The screw jaw is replaceable and equipped with a safety button for secure and convenient operation.
Not every plate can be lifted vertically by a hook. Where a steel plate, construction section or profiled bar must be picked up and transported horizontally, a dedicated horizontal clamp holds the edge firmly. The DPD is built for exactly that: high-quality carbon steel, with a safety button and a replaceable screw jaw.
Which DPD model fits your job? For thin plates, the DPD-0.8 to DPD-3 (0.8–3t per pair) cover jaw openings from 0–25 mm to 0–45 mm. For thicker or heavier plates, the DPD-4 to DPD-10 (4–10t per pair) extend from 0–50 mm up to 0–125 mm. All are used in pairs at a 60° lift angle (or multiples), and snatch or shock loading must be avoided.Compare: DPD HORIZONTAL LIFTING CLAMP Compare: DPH PIPE LIFTING CLAMP
| Model | WLL (t) per pair | Jaw Opening (mm) | Net Weight (kg) |
| DPD-0.8 | 0.8 | 0–25 | 2.5 |
| DPD-1 | 1 | 0–30 | 3.5 |
| DPD-1.6 | 1.6 | 0–30 | 4 |
| DPD-2 | 2 | 0–40 | 5 |
| DPD-3 | 3 | 0–45 | 6 |
| DPD-4 | 4 | 0–50 | 6.5 |
| DPD-5 | 5 | 0–55 | 7.5 |
| DPD-6 | 6 | 0–65 | 10.5 |
| DPD-8 | 8 | 0–100 | 22 |
| DPD-10 | 10 | 0–125 | 33 |
| Model | WLL (t) per pair | Jaw Opening (mm) | Net Weight (kg) |
| DPD-0.8 | 0.8 | 0–25 | 2.5 |
| DPD-1 | 1 | 0–30 | 3.5 |
| DPD-1.6 | 1.6 | 0–30 | 4 |
| DPD-2 | 2 | 0–40 | 5 |
| DPD-3 | 3 | 0–45 | 6 |
| DPD-4 | 4 | 0–50 | 6.5 |
| DPD-5 | 5 | 0–55 | 7.5 |
| DPD-6 | 6 | 0–65 | 10.5 |
| DPD-8 | 8 | 0–100 | 22 |
| DPD-10 | 10 | 0–125 | 33 |
If a steel plate, construction section or profiled bar must be lifted in horizontal position, the DPD horizontal clamp is the right choice.
Choose from 0.8t, 1t, 1.6t, 2t, 3t, 4t, 5t, 6t, 8t and 10t per pair based on the heaviest plate load, plus safety margin.
Confirm the jaw range matches your plate: 0–25 mm to 0–45 mm on the lighter models, and 0–50 mm up to 0–125 mm on the 4–10t units.
The WLL applies when used in pairs at a 60° lift angle (or multiples). The screw jaw is replaceable and a safety button is fitted; avoid snatch or shock loading.
Specially designed for horizontal lifting and transportation of steel plates, construction materials and profiled bars.
Manufactured from high-quality carbon steel for a strong and durable structure.
Available from 0.8–10T WLL per pair, with multiple models for different lifting requirements.
Jaw opening ranges from 0–125 mm, accommodating steel plates and profiles of different thicknesses.
The screw jaw is replaceable, making maintenance convenient and extending the service life of the clamp.
Equipped with a safety button and suitable for use in pairs or multiples; the WLL is specified for paired use at a 60° lift angle.
What is the DPD horizontal clamp used for?
It is suitable for lifting and transport of steel plates, construction and profiled bar in horizontal position.
What capacities does it come in?
The DPD series covers 0.8t, 1t, 1.6t, 2t, 3t, 4t, 5t, 6t, 8t and 10t per pair.
What jaw openings are available?
Jaw opening ranges from 0–25 mm on the 0.8t model up to 0–125 mm on the 10t model, covering thin sheets to thick plates.
How is the clamp used in a lift?
The WLL is the maximum load authorized when used in pairs at a 60° lift angle; clamps can be used in pairs or multiples. Snatch or shock loading must be avoided.
Can the jaw be replaced?
Yes — the screw jaw of the body can be changed, and the clamp also has a safety button.
Tell us your capacity, lifting height, and working‑condition requirements — we'll confirm the correct model and send pricing.
Request a Quote
Dele electrical(HANGZHOU) co.,ltd
sales@delelifting.com
+86-13868020452
