HOME >> PRODUCTS >> TROLLEY >> MANUAL PLAIN TROLLEY
A plain push-along beam trolley built with thick steel plates, a strong shaft and forged steel running wheels on sealed ball bearings — built for workshops and single-girder monorail systems that need simple, manpowered travel along I-beams, fast beam-width adjustment by adding or removing collars, and a 6-times-capacity safety test for reliable long-term service from 0.5 to 10 tones.
The DTDP Type Plain Trolley is a compact manual push trolley designed for smooth horizontal movement of suspended loads along I-beams. Available in capacities from 500 kg to 10,000 kg, with adjustable beam flange widths of 68–203 mm, it is suitable for use with manual chain hoists, lever hoists, and other lifting equipment in factories, workshops, warehouses, and construction sites.
Its plain trolley design requires no electrical power, providing a simple and reliable solution for moving loads along fixed tracks. The twin-beam wheel structure and adjustable width design offer flexible installation and compatibility with different beam sizes, making the trolley suitable for a wide range of material handling applications.
Available in 0.5T, 1T, 2T, 3T, 5T, and 10T capacities to meet diverse lifting and material handling requirements.
Adjustable beam flange widths from 68–203 mm provide compatibility with various I-beam sizes and installation conditions.
The non-powered manual design requires no electricity, enabling straightforward and reliable horizontal load movement in various working environments.
The compact twin-wheel configuration, combined with a minimum curve radius of 0.8–1.6 m, enables flexible movement across suitable tracks and confined spaces.
Not every lifting application requires powered travel. Where a load needs to be moved manually along an I-beam or runway, the DTDP Type Plain Trolley provides a simple, reliable, and economical solution. With a 0.5–10T capacity range and adjustable beam flange widths of 68–203 mm, it is well suited for workshops, factories, warehouses, and general material handling applications.
Which DTDP model fits your job? Choose the model according to your required lifting capacity and beam flange width. The DTDP series offers six capacity options from 0.5T to 10T, with different adjustable beam widths and dimensions for flexible installation. Its manual push design requires no electrical power, making it a practical choice for fixed-track lifting where simple and dependable load movement is needed. Compare: DTDP TYPE PLAIN TROLLEY Compare: DTDG TYPE GEARED TROLLEY
| Model | Rated capacity(t) | Min.Curve Radlue(m) | Beam Flange Width(mm) | Net Weight(kg) | |
| M | |||||
| DTDP0.5 | 0.5 | 0.8 | 68-126 | 5.5 | |
| DTDP1 | 1 | 0.9 | 80-146 | 7.6 | |
| DTDP2 | 2 | 1 | 80-150 | 10 | |
| DTDP3 | 3 | 1.2 | 80-150 | 21 | |
| DTDP5 | 5 | 1.3 | 100-203 | 36.2 | |
| DTDP10 | 10 | 1.6 | 122-203 | 77.6 | |
All dimensions in mm
| Model | Dimensions(mm) | |||||||||
| A | B | C | D1 | D2 | F | E | G | H | S | |
| DTDP0.5 | 210 | 196 | 174 | Φ78 | Φ57 | 1.5-3 | 24 | 38 | 97 | 22 |
| DTDP1 | 230 | 213 | 174 | Φ84 | Φ60 | 1.5-3 | 24 | 38 | 89 | 27 |
| DTDP2 | 234 | 255 | 216 | Φ102 | Φ75 | 1.5-3 | 37 | 52 | 111 | 33 |
| DTDP3 | 248 | 300 | 249 | Φ120 | Φ90 | 1.5-3 | 42 | 59 | 117 | 30 |
| DTDP5 | 314 | 340 | 305 | Φ141 | Φ110 | 1.5-3 | 46 | 75 | 154 | 43 |
| DTDP10 | 344 | 450 | 410 | Φ189 | Φ150 | 1.5-3 | 72 | 110 | 195 | 45 |
If the load needs to move horizontally along an I-beam or runway, the DTDP plain trolley provides simple, manual load positioning without electrical power.
Choose from 0.5–10T based on your required working load and the applicable safety margin.
Confirm that the trolley’s adjustable flange width matches your I-beam before ordering. The DTDP series covers approximately 68–203 mm, depending on the model.
If the trolley will operate on curved tracks, confirm that the required curve radius is compatible with the selected model. The minimum curve radius ranges from 0.8–1.6 m depending on capacity.
Available in 0.5T, 1T, 2T, 3T, 5T, and 10T models for diverse lifting requirements.
Features a twin-wheel structure for balanced load distribution and smooth, stable trolley movement.
Accommodates 68–203 mm beam flange widths, providing flexible compatibility with different I-beam sizes.
Operates entirely by manual pushing, eliminating the need for electrical power and simplifying on-site operation.
With a minimum curve radius of approximately 0.8–1.6 m, it is suitable for compatible curved tracks and confined workspaces.
Compact and easy to adjust, it can be paired with manual chain hoists, lever hoists, and other lifting equipment for material handling in factories, warehouses, workshops, and construction sites.
What is the DTDP plain trolley used for?
The DTDP is a manual plain trolley that rides on an I-beam to move loads horizontally, pairing with a chain block or hoist of matching capacity for simple, reliable lifting and traversing.
What capacities does it come in?
The DTDP series covers 0.5t, 1t, 2t, 3t, 5t and 10t rated capacity (models DTDP0.5 to DTDP10).
What beam flange widths does it fit?
The flange width range spans 68–203 mm, with a minimum curve radius of 0.8–1.6 m, adapting to a wide range of standard I-beams and track layouts.
How does it deliver smooth, durable travel?
Its simple, plain-construction design keeps the trolley lightweight and easy to maneuver, while the high-strength build resists deformation for dependable long-term use across models from 5.5 kg to 77.6 kg net weight.
What is it made of?
It is manufactured from high-quality steel components, with overall dimensions optimized per model (M from 210 mm on the 0.5t to 344 mm on the 10t) for compact, space-saving operation.
Tell us your capacity, lifting height, and working‑condition requirements — we'll confirm the correct model and send pricing.
Request a Quote
Dele electrical(HANGZHOU) co.,ltd
sales@delelifting.com
+86-13868020452
