HOME >> PRODUCTS >> OTHER LIFTING TOOLS
A DJL wire rope grip made of drop‑forged alloy steel with quenched & tempered construction and color zinc plated finish, fitted with a delicate smooth clamp mouth and latch safety device to prevent line slipping, that performs secure cable pulling with minimal surface damage to wires. Available in rated capacities from 1t to 3t and grip ranges from 2.5–16mm to 16–32mm, it’s built for power construction, cable installation and line maintenance projects that require gentle, reliable wire gripping and pulling, not just basic rough clamping tools.
The DJL wire rope grip pairs a drop‑forged alloy steel body with quenched & tempered construction and color zinc plated finish, giving the unit a smooth, cable‑friendly clamp mouth with latch safety device that prevents line slipping and causes minimal surface damage to wires during pulling. Available in rated capacities from 1t to 3t with grip ranges from 2.5–16mm to 16–32mm, it's built for power construction, cable installation and line maintenance projects where cables need gentle, secure gripping and pulling, not just rough basic clamping.
It shares its heavy‑duty forged steel build with industrial lifting clamps, but adds a cable‑protective jaw design and anti‑jump latch — select the model matching your cable diameter and load requirement for optimal on‑site performance.
With a delicate smooth clamp mouth and precision gripping plane, it delivers firm cable pulling force while causing minimal damage to wire and cable surfaces.
Fitted with a latch insurance device on the clamp mouth, it reliably prevents wire slippage and line jumping during pulling and tensioning operations for improved on-site safety.
Manufactured from drop forged alloy steel with quenched and tempered construction, it delivers exceptional structural strength, wear resistance and long service durability.
Available in rated capacities from 1t to 3t with grip ranges spanning 2.5–16mm to 16–32mm, it matches diverse cable diameters and on-site load requirements.
Not every cable pulling job needs heavy oversized grippers or high load capacity. Where wire ropes are tensioned and pulled at temporary power construction sites or cable installation work — a transmission line, cable routing, overhead maintenance — a basic cable grip does the job at lower weight and easier handling than heavy-duty clamping tools. The DJL is built for exactly that: dependable, gentle wire rope gripping.
Which DJL model fits your job? If your cable diameter is small from 2.5mm to 16mm, the DJL-1000 securely grips wires with 1 ton rated load. If your cable size ranges from 4mm to 22mm, the DJL-2000 handles pulling tasks with 2 ton capacity. For thicker cables of 16mm to 32mm, choose DJL-3000 with 3 ton rated load. If you just need lightweight, simple wire holding for routine cable pulling, the DJL series is the simpler, more economical choice.
Compare: DJL WIRE ROPE GRIPCompare: SCC SCREW CAM CLAMP
| Model | Rated capacity (t) | Grip Range(mm) | Net Weight(kg) |
| DJL-1000 | 1 | 2.5-16 | 0.75 |
| DJL-2000 | 2 | 4-22 | 1.4 |
| DJL-3000 | 3 | 16-32 | 2.5 |
If you only handle general steel workpieces with no surface protection requirement, a standard lifting clamp is the simpler, more economical choice.
Choose from 1t to 3t rated capacity based on your heaviest cable pulling load, plus an appropriate safety margin.
Confirm your wire rope or cable diameter falls within the selected model's grip range (2.5–16mm to 16–32mm) before placing an order.
All DJL grips adopt drop forged alloy steel with quenched & tempered construction and anti-jump latch device, ensuring durable, safe performance for power transmission and cable installation jobs.
With a delicate smooth clamp mouth, it ensures firm gripping while causing minimal harm to wires and cable surfaces.
The precision sharp clip plane delivers strong traction for cable pulling, without inflicting damage to the cable surface.
Fitted with a latch insurance device on the clamp mouth, it reliably prevents wire slippage and line jumping under tension.
Manufactured from premium drop forged alloy steel, it delivers exceptional structural strength for heavy-duty pulling operations.
Built with quenching and tempering treatment, it achieves enhanced toughness, wear resistance and long service durability.
Coated with color zinc plating for outstanding anti-corrosion performance; available in 1–3t rated capacities with grip ranges from 2.5–32mm to match diverse cable specifications.
From what cable work scenarios can the DJL wire rope grip work?
It is used for cable pulling, wire tensioning and line installation in various working scenarios — power transmission construction, overhead line maintenance, cable routing and on-site wire handling operations.
What capacities does it come in?
The DJL series covers 1t, 2t and 3t rated capacity per unit, matching different cable pulling and tensioning load requirements.
How does the safety mechanism work?
The grip is fitted with a latch insurance device on the clamp mouth, which prevents wire slipping and line jumping during pulling and tensioning. The precision gripping plane delivers firm traction without damaging cable surfaces.
What grip ranges are available?
Standard grip range spans from 2.5–16mm up to 16–32mm across models, to fit wire ropes and cables of different diameters.
What material and construction is it made with?
It is manufactured from drop forged alloy steel with quenched and tempered construction, and finished with color zinc plating for corrosion resistance, suitable for heavy-duty outdoor cable handling operations.
Tell us your capacity, lifting height, and working‑condition requirements — we'll confirm the correct model and send pricing.
Request a Quote