The DYC beam clamp provides a quick and versatile rigging point for hoisting equipment, pulley blocks or loads, with a working load limit from 1t to 10t. Its wide adjustment range gives flexible application across varying beam widths. The central threaded spindle allows easy attachment and a safe, secure grip, and the spindle can be secured against loosening during use.

The clamp covers steel-beam widths of 75–230 mm on the 1t and 2t models, widening to 80–320 mm on the 3t unit and 90–320 mm on the 5t and 10t units. Net weight runs from 3.85 kg up to 18 kg, keeping it light and fast to fit. An optional compact version is available for applications on beams with a low base height.

Why Choose a DYC Beam Clamp?

Not every lifting rig needs a fixed anchor point. Where you need a quick, versatile rigging point on a beam — for hoisting equipment, pulley blocks or loads — the DYC beam clamps onto the flange in seconds. The central threaded spindle gives easy attachment and a safe, secure grip, and the spindle can be secured against loosening during use.

Which DYC model fits your job? For light to medium rigging, the DYC-1000A and DYC-2000A (1t / 2t) fit beam widths of 75–230 mm and weigh only 3.85–5 kg. For heavier loads, the DYC-3000A, DYC-5000A and DYC-10000A (3t / 5t / 10t) cover 80–320 mm or 90–320 mm beam widths. All benefit from a wide adjustment range for flexible application, and a compact version is available for beams with a low base height.Compare: DYC Beam ClampCompare: DLBC Beam Clamp